Insulation stripping pliers

On one of the handles on the inside there is a “blade” for cutting the wire: < br />
“Retro” cable (braided with threads). And profiles for crimping insulated terminals:
Next was the ball screw 3×2.5.
The experience of ordering a tool from Aliexpress, in principle, I consider positive for myself, therefore, without any doubts, such pliers were chosen and ordered:
Then I stripped the TV cable. A blade for shortening conductors. The braid under the insulation was not damaged:
Insulation from the inner conductors of the PVSbm cable can be easily removed from both in one pass:
I checked almost all of them, which I will discuss below.
The stripper jaws are made of durable steel and are notched to securely fix the cable when
removal of insulation:
The plastic limiter is responsible for setting the desired length of the insulation to be removed:
Installation cable (MGShV 0.2):
Another thin wire from an old push-button phone charger:

The thinnest wire is from the headphones.
The dimensions of the wires are stamped on the metal near the working area with which the stripper can work (from 0.2 to 6 mm), but here it is necessary without fanaticism when working with wires from the upper limit, because you can simply break the pliers: Previously, a similar product was reviewed on mysku, but I think it is always interesting to read about a good tool, or maybe (suddenly) they will write something new.
And finally, the tip with a plastic "skirt":
Here, the pliers did their job, of course, but the sponges damaged the insulation itself and the poor quality break: If suddenly someone does not know , their main purpose is to save teeth from chipped enamel, and fingers from cuts with a knife, when removing insulation from almost any type of wire.
Summarize: The tool, of course, is not professional (for such a price this cannot be expected), but it fits perfectly for a home master.
A https://jiji.ng/60-kids-costumes/soldier hard wire from some device: I really liked that the handles turned out to have rubberized inserts:
The wires are over 🙂 so it remains to check the "additional features". Can strip insulation from almost any wire.
Audio cable 2×3.3.

Insulation stripping pliers

I had to turn the cable over and take it off again:
Then I removed the insulation from the conductors themselves: < br />
Dimensions and weight: Here the problem arose in the threads – the insulation was removed normally, but the threads fluffed up: No problem: To test the stripper, I made such a “test bench” (I didn’t even know that I would find so many types of different wires: )
I would also like to note that the copper conductors themselves in this cable are very thin – not the same as in a regular wire and with a tightly tightened jaw compression screw – several conductors were damaged: Crooked, but copes with the task well:
Telephone cable (modern). The adjusting screw controls the spring, which is responsible for pressing the upper and lower parts of the jaws together (this is necessary mainly for thin wires, when the pliers may either not remove the insulation, or vice versa , removing the insulation will damage the conductor itself): The thick insulation was removed well:
Here it was not possible to remove the insulation from one pass – it turned out to be very thick.
PVA cable 3×1.5.
Internal conductors – similarly: The wire and insulation are thin – you need to adjust the compression force with a screw. Filmed normally:
/>The next wire is an old telephone wire. Same
used a cutting blade, "bit off" without problems:
The insulation came off perfectly: The stripper did a great job: No problem:
Further, PVSbm 2×0.75 (round).
When the screw is fully tightened, which regulates the compression force of the jaws, the stripper can easily break a thin wire:
Next went some exotic single-core with very rigid insulation, presumably from Soviet times (although the condition of the copper core gives reason to doubt — it is very much in good condition).
That’s why I started with VVGng(A)-LS 3×2.5.
Terminal with wires 0.75 for connecting spotlights and ceiling lights: Therefore, it was decided to order new ones. Of course, you do not need to abuse a large-diameter cable so as not to break the pliers, but the main brands of wires used in everyday life are “on the shoulder” for this stripper.
I also removed the insulation from the inner core without problems: The tool can rightly be considered universal, because. in addition to its main task – removing insulation, they can, among other things, cut the wire to the desired length and crimp the same thin-walled NShVI lugs or insulated terminals. I checked the plastic limiter: The inner screen is not damaged.
Small usage video: Recently, I did a review on pliers for crimping NShVI tips, and then I almost completely rolled out my old pliers for stripping insulation (in common people, a stripper) – the sponges constantly began to sink and the plastic handles broke. At the moment, this is the best and most common type of cable for household wiring.
Twisted pair shielded . Hello everyone and good mood! The stripper coped with some stress at a time with both a thick PVC sheath and rubber filling (further pictures, so as not to lengthen the review, will be in the form of collages of several): I thought to start with a thick aluminum wire, it even fit into the pliers (tight), but then, on a sound reflection, I abandoned the idea of ​​​​removing the insulation from it with pliers, it is very thick and tight, and there was a risk of simply breaking the tool ( because it is still intended for "domestic" use, and not for strength exercises):

Schreibe einen Kommentar

Deine E-Mail-Adresse wird nicht veröffentlicht.

BFK – Beratungsstelle für Kraftfahreignung Köln

Die BFK gehört zu den größten MPU-Vorbereitungsinstituten in Deutschland. Uns zeichnet eine hohe Einsatzbereitschaft gebündelt mit Expertenwissen, welches wir durch Schulungen ständig erweitern. Wir beraten Sie in weiten Teilen Deutschlands bei den Tehmen:

Ablauf der MPU | Abstinenznachweise bei Drogen & Alkohol | Haaranalyse | Urinkontrollen | Leberwerte | Sperrfristverkürzung | Fehlervermeidung bei Sperrfristen | Kosten | Verjährung | EU-Führerschein | Wiederholungstäter | negatives Gutachten | Reaktionstest | Medizinische Untersuchung

So erreichen Sie uns

Kreuzgasse 2-4 50667 Köln - Zentrum

MO – FR
10:00 – 19:00 Uhr

Alle Rechte vorbehalten. Beratungsstelle für Kraftfahreignung Köln

Hannover | Köln | Frankfurt | Kiel | Hamburg | Gifhorn